Convoy Devils Claw Canard Ver2 Scheduled to be released

[jongkihong]

than the existing Ver1 product.
It looks a little more aggressive when installing the product.

 

[funesto]

When and where will these be available?

 

[Audible Silence]

had to go look at my car to spot the difference, but now i can't unsee it.
I like it. when and where can i get it??

For reference:

 

[jongkihong]

The difference between Ver1 and Ver2 is
The length of the horns changed.
In the case of Ver1, the upper horn is long.
And the length of the lower horn is short.
In the case of Ver2, the length of the upper horn is short.

Second, in the case of Ver1, the horns have a slight angle.
However, in the case of Ver2, it is a round shape without corners.

Yes, in the case of Ver2
It is slightly more aggressive than Ver1.

Currently selling on eBay
It will probably be sold at the Stinger Shop as well.

 

[General_Vodka]

Actually an upgrade. You should make one with clear acrylic or something in the middle of the blades that way they don't block aftermarket led drls. I would probably be interested in that. Don't want one with LEDs since I already have LED DRLs

 

[Stinger GT SS]

than the existing Ver1 product.
It looks a little more aggressive when installing the product.

What material are they made from?

 

[General_Vodka]

What material are they made from?

I'm betting ABS or similar

 

[Stinger GT SS]

I'm betting ABS or similar

Hope so, I’ve seen some that people have bought that are made out of MDF.

 

[General_Vodka]

Hope so, I’ve seen some that people have bought that are made out of MDF.

What who in the world thought MDF was a good option for this application? You might as well cut them out of some spare Amazon cardboard boxes at that point lol. HDPE or Acrylic would be my other choices but it's harder to work with HDPE.

 

[Stinger GT SS]

What who in the world thought MDF was a good option for this application? You might as well cut them out of some spare Amazon cardboard boxes at that point lol. HDPE or Acrylic would be my other choices but it's harder to work with HDPE.

Exactly, but I have seen examples of MDF ones people had bought on FB sites & they were not pleased.

 

[jongkihong]

The material is not MDF.
It is a material called Fomax, which is close to ABS (plastic).
It is resistant to sunlight and moisture and hardly deforms.

What material are they made from?

 

[jongkihong]

Actually an upgrade. You should make one with clear acrylic or something in the middle of the blades that way they don't block aftermarket led drls. I would probably be interested in that. Don't want one with LEDs since I already have LED DRLs

Actually an upgrade. You should make one with clear acrylic or something in the middle of the blades that way they don't block aftermarket led drls. I would probably be interested in that. Don't want one with LEDs since I already have LED DRLs

There is no information about LED DRL in Korea.
if you give information
we can make it

 

[Stinger GT SS]

The material is not MDF.
It is a material called Fomax, which is close to ABS (plastic).
It is resistant to sunlight and moisture and hardly deforms.

Thanks for clarifying.

 

[Audible Silence]

could they be mounted "upside down" if we want the upper horn longer?

 

[jongkihong]

Upside down installation is not possible.