BROKEN K WHEEL CAPS

[Paisley]

Has anyone switched out their wheel caps? Do they just pop out? Whats a good place to order them?

 

[Kia Stinger]

Has anyone switched out their wheel caps? Do they just pop out? Whats a good place to order them?

Yes. Lots of people. They just pop out... K's:

KLexus / Kia 3.0 Wheel Center Cap Overlay Set

You’ve rebadged the front and back of your Kia and now you need to cover that cheap looking KIA logo on the wheels. Here’s the number one solution to your problem! These wheel center caps fit ANY Kia wheel and have a classy, but OEM style look, brought to life by LODEN.

kdmwarehouse.com

If you want the "E" caps:
Set of Kia Stinger OEM 18 and 19 Inch Wheel Caps - Kia Stinger Magazine
Set of Kia Stinger OEM 18 Inch Wheel Caps - Kia Stinger Magazine

Order today and they'll be at the post office tonight. You should have them by Wednesday.

 

[Paisley]

I already replaced the Front and rear emblems. I just need the wheels.

 

[AV8R]

I already replaced the Front and rear emblems. I just need the wheels.

There are 2 types available. The 19” rims have a complete cap that goes over the wheel nuts. The 18” rims have a emblem that sticks over the Kia logo only.if I remember right you have the model with 18” rims?

 

[AV8R]

I already replaced the Front and rear emblems. I just need the wheels.

SORRY just realised you wanted the k emblem. They are available on eBay tho, have a look.

 

[Paisley]

I ordered some last night from k5.

 

[Kia Stinger]

I ordered some last night from k5.

Good

SORRY just realised you wanted the k emblem. They are available on eBay tho, have a look.

We don't need to point anyone to eBay for badges. We have plenty of vendors here - including myself.

 

[AV8R]

Oops I forgot sorry. Yes and I agree your prices are way better than eBay! I’m bad..

 

[Kia Stinger]

Oops I forgot sorry. Yes and I agree your prices are way better than eBay! I’m bad..

It's okay, I'm just messing around. But we do have vendors who support the site and, at least the way I see things, we should support them. Buying from me also helps me "help here"...

 

[Paisley]

There are 2 types available. The 19” rims have a complete cap that goes over the wheel nuts. The 18” rims have a emblem that sticks over the Kia logo only.if I remember right you have the model with 18” rims?

So i got my wheel emblems today and do u giys think i should heat up the adhesive before i stick them on?

 

[Kia Stinger]

So i got my wheel emblems today and do u giys think i should heat up the adhesive before i stick them on?

You really shouldn't have to...

 

[Paisley]

You really shouldn't have to...

Ok Thanks

 

[GuyManDude]

@Paisley be sure to post a picture of how it looks. I am waiting on the E caps to arrive. Would like to see how it looks since we have the same car.

 

[AV8R]

The heat probably makes them more flexible so you get no kinks. Hold them in your hands maybe to warm them up?

 

[Paisley]

The heat probably makes them more flexible so you get no kinks. Hold them in your hands maybe to warm them up?

Thanks.....Good idea

 

[AV8R]

Thanks.....Good idea

Whatever you do dont put heat directly on them ie too hot or they will melt, try a not too hot water bottle for a minute.

 

[Paisley]

Glad u told me that! My 1st thought was to hold my lighter to the adhesive for a sec. I had the dealership put my front and back emblems on, should've had them do these too!

 

[AV8R]

Glad u told me that! My 1st thought was to hold my lighter to the adhesive for a sec. I had the dealership put my front and back emblems on, should've had them do these too!

No direct flame or its all over and up in smoke!

 

[AV8R]

Glad u told me that! My 1st thought was to hold my lighter to the adhesive for a sec. I had the dealership put my front and back emblems on, should've had them do these too!

Found this off the 3d website;
How qualitatively to stick our stickers?

1. The place for stickers needs to be cleared of dirt and a dust and to degrease.
2. The surface should be flat and cleared.
3. If during gluing of stickers on the street not warmly, or it seems that stickers not so soft, they need to be heated a bit.
   We recommend to use the hair dryer for the best gluing of stickers. It is enough to blow in a sticker warm air within 30 seconds and after that they can be pasted.
   Attention. Necessary to use the hair dryer only on the first (weakest) capacity.
4. After that is necessary to press evenly a sticker to a surface, press slightly.

 

[Paisley]

Found this off the 3d website;
How qualitatively to stick our stickers?

1. The place for stickers needs to be cleared of dirt and a dust and to degrease.
2. The surface should be flat and cleared.
3. If during gluing of stickers on the street not warmly, or it seems that stickers not so soft, they need to be heated a bit.
   We recommend to use the hair dryer for the best gluing of stickers. It is enough to blow in a sticker warm air within 30 seconds and after that they can be pasted.
   Attention. Necessary to use the hair dryer only on the first (weakest) capacity.
4. After that is necessary to press evenly a sticker to a surface, press slightly.

Thanks...this is very helpful