1st log check . Map1

[Terry@BMS]

Older firmware showed raw timing by default, newer firmware timing corrections by default.

 

[StingertimeNC]

knew it was the older firmware showing the raw timing. With good 91 octane you should be able to run map 1. anything 2.3 and less is fine. 0-.8 is great. I'm guessing you will likely just daily map 1 unless you can get the octane up to 93. Also, like someone above said, do a log from 20-100 mph, WOT. if you are 2.3 or below for timing deviation you should be more than safe.