how to

  1. Tee

    How to make your own CK71 Style DRLs

    Let me start this out by saying that these definitely are not up to the same quality as Chris and his CK71 product and I am in no way trying to cut into his production/profits. I just wanted to share this project with others. Overall cost for this project was $100 for the Switchback LEDs and...
  2. robz32

    How to install CK71 DRL

    Tools required: Flat head screw driver Phillips screw driver Plastic trim removal tool (to remove plastic clips) Long needle nose plier With the front bumper removed. Place it facing down, so that you will be able to remove the side air ducts. NOTE: Place some towels or rags under the...
  3. robz32

    How To install aftermarket DRLs

    Tools required 1x Short Philips screw driver 1x Long Phillips screw driver Electrical tape Wire crimpers Pliers Quick splice connect plugs (got them from amazon HERE) Get your DRLs here: Kia Stinger GT LED Daytime Running Lights - Kia Stinger dot com For this installation I recommend...
  4. robz32

    How to install OEM Wireless Charger on your Stinger

    Rejoice Stinger community, because alas I can confirm that the Wireless Charging feature (originally removed from the US Spec Stinger) is fully compatible with our cars and it is a PLUG AND PLAY afair. Here is the step by step guide. I did everything from the passenger side as it allowed me to...
  5. robz32

    How To Convert Reverse lights to LED

    Alright guys as promised. Here is the how to guide to replace your reverse halogen bulbs with LED's. Here are the tools you will be using. 2- Plastic panel remover tools (A thin one and a medium one, can use only one, but just in case you need to pry a bit harder) 1- Ratchet 1- 10mm Socket 1-...
Back
Top