Kia Stinger Vanity/piggyback /fuse cover

[TonyG]

Like to say first thank you for the write up. Very well written. Is you could please send me DM. I'll send you some instructions that will help us identify the issue and see what we can do to modify it. Greatly appreciate the feedback.

Just installed it. Glad the pictures here show where the brackets go / how to put things together. Could have figured it out eventually, but first tried to pop the plastic pieces through the holes like a pop-it. When it was obvious they wouldn't fit, came back here to double-check.

Decent design - I like that we have screws instead of pop-its on the left side.

Slight concern it will rub on the rubber divider (bottom-right corner, looking at it from on top - almost looks like it has already rubbed in the pictures), but as long as it doesn't make any noise, not really much of an issue. Ideally, could revise the bottom-right corner 2-3 mm left in the next version, and avoid that issue.

Had to re-route one of my jb4 wires, as there's not enough space at the top-right, where I had previously routed the thick wire harness. Had to re-route to have enough space to route at the bottom-right as shown in the pics.

On the whole, if no rubbing/noise issues, easily 8.5/10.[/QU

 

[Hockster]

@TonyG sent a PM as well. I'm interested in both covers and shipping costs to Canada.

 

[Gtecko]

On the whole, if no rubbing/noise issues, easily 8.5/10.

8.5 .. what would make it a 10/10 then ?
show picture of how you re-routed your cables.

 

[ImportShark Elvis]

Installed both sides today and I had the one that came before this. Hands down this is a much better setup.

 

[turboAWD]

Like to say first thank you for the write up. Very well written. Is you could please send me DM. I'll send you some instructions that will help us identify the issue and see what we can do to modify it. Greatly appreciate the feedback.

I sent a DM 4-5 days ago..

 

[MrSmoofy]

Ordered on 4/17 as of today
April 25, 2020 at 1:08 pm

Departed

CHICAGO, UNITED STATES

I should have mine in the next few days.

 

[RUFFSTUFF]

My ECU side showed up today. Very easy install, though I bent it slightly to clear the cable run.

 

[mhal8876]

Got my ECU side the other day too!

 

[TonyG]

Got my ECU side the other day too!

Was everything in there this time lol. Hope so

 

[cncBilly]

Installed both sides today and I had the one that came before this. Hands down this is a much better setup.

You're looking pretty good under the hood there Elvis

 

[BostonGTS]

 

[BostonGTS]

Just installed. Image above. Have some work to do routing wires but I love the look. Is the ECU side cover supposed to replace the plastic factory cover?

 

[xot1]

Just installed. Image above. Have some work to do routing wires but I love the look. Is the ECU side cover supposed to replace the plastic factory cover?

Yes, it replaces it

 

[TonyG]

Just installed. Image above. Have some work to do routing wires but I love the look. Is the ECU side cover supposed to replace the plastic factory cover?

Yes it replaces the factory cover.

 

[MrSmoofy]

Just installed. Image above. Have some work to do routing wires but I love the look. Is the ECU side cover supposed to replace the plastic factory cover?

Are they black? Maybe it's just your orange paint reflecting on it weird but they look almost brown/tan

 

[BostonGTS]

Mine are raw (silver)

 

[RUFFSTUFF]

View attachment 41042

Those Wires! My eyes are bleeding...!

 

[xot1]

Just do like me:

 

[CoconutRob]

Sure would like to see this available for the g70.

 

[runner1]

I wish I could buy these out of the USA. Freight costs to Canada were just too high. Will there be a Usa vendor in the near future who will be stocking?