Hey! I see you! Please take two seconds to sign up! We'd love to have you as a member of our Kia Stinger club. You have nothing to lose and so much to gain... :)

3.3TT SSR Performance Dual Front Mount CAI - PRE-ORDER SPECIAL! (pics/vid inside)

Discussion in 'Engine, Drivetrain, and Exhaust Discussion' started by SSR Performance, Oct 5, 2018.

  1. SSR Performance

    SSR Performance United States Member Authorized Vendor

    77
    122
    33
    Location:
    Orange , CA
    Finally...
    The time has come! I introduce to you, the world's first true cold air intake for the Kia Stinger 3.3TT! Below are some late-development photos. Final photos will be coming soon but this is exactly what you can expect sound and looks wise! Scroll down for sound clips!

    THESE PHOTOS ARE MID DEVELOPMENT ZIP-TIES WILL NOT BE USED IN THE FINAL APPLICATION...lol :)
    [​IMG]

    [​IMG]

    It has been a long time coming but we are extremely excited to finally announce the official pre-order release of our SSR Performance Dual Front Mount Cold Air Intakes! As you guys know we kept this project under wraps, and it was for good reason. This is the world's first true cold air intake for the Kia Stinger 3.3TT. Our in-house engineering team spent countless hours in R&D including 3D scanning, 3D design and modeling, and then finally 3D printing our custom intake ducts that make this intake possible.

    As you can see, our all new front mount intakes take the filters from inside the hot engine bay and put them right where you have the coldest, most dense, air right behind the front grille. Given that the Kia Stinger 3.3TT is turbocharged, this is the best kind of air you can provide for your car to make optimal power.

    Similar intakes have been used and proven on turbo motors for years now including applications on BMW's, Infiniti's, and more. This is the first time this application has been designed for use on a Kia.

    For the first time ever, these intakes are available at a discounted rate!
    PRE-ORDER $629.00
    MSRP $729.00

    >>CLICK HERE TO BUY NOW<<

    AGAIN... THESE PHOTOS ARE MID DEVELOPMENT ZIP-TIES WILL NOT BE USED IN THE FINAL APPLICATION...lol :)
    [​IMG]

    [​IMG]
    INCLUDES:
    - Reinforced 4 Ply Silicone Couplers
    - Custom Aluminum Piping (offered in Impact Gloss Black, Fashion Gloss Grey, Gloss Red)
    - Custom Intake Ducts
    - Clamps
    - SSR Performance 6 Layer Cotton Dry Filters (application specific)

    INSTALL DIFFICULTY:
    Intermediate. FULLY BOLT-ON NO CUTTING REQUIRED. Front bumper removal is necessary for installation. Removing the front bumper is very straight forward and can be done with basic tools.

    POWER FIGURES:
    [​IMG]

    SOUND CLIPS:


    PRE-ORDER SHIPPING ESTIMATE:
    First batch will have 25 intakes. These intakes are set to start shipping late December in the order of which the orders are received. Once the first batch is gone these intakes will be on backorder until further production is finished.

    WEBSITE LINK (ORDER NOW):

    CLICK HERE TO ORDER NOW> KIA Stinger GT 3.3TT Dual Front Mount Cold Air Intake
     
    Last edited: Oct 5, 2018
    • Winner Winner x 4
    • Like Like x 3
    • Friendly Friendly x 1
  2. DiabloStinger

    DiabloStinger United States Active Member

    416
    126
    43
    Location:
    Gilbert, AZ
    Sexy
     
    • Like Like x 1
  3. NYdito

    NYdito United States Active Member

    330
    156
    43
    Wow that looks amazing.
     
    • Agree Agree x 1
  4. Nasty1

    Nasty1 United States Active Member

    114
    52
    28
    Location:
    Houston
    With them being In front what keeps them from sucking In moisture during heavy rain when driving?
     
    • Agree Agree x 1
  5. SSR Performance

    SSR Performance United States Member Authorized Vendor

    77
    122
    33
    Location:
    Orange , CA
    Thank you sir :)

    Thank you brotha! :)

    Shah @ SSR Performance
     
  6. SSR Performance

    SSR Performance United States Member Authorized Vendor

    77
    122
    33
    Location:
    Orange , CA
    Just got asked that by another forum member as well.. here is what I told him:

    "Applications very similar to these have been well tested in the rain, so unless you're driving through a hurricane / freakish storm.. you'll be just fine :)"

    So as stated, behind grille applications like these have been used for years now on BMW's (a platform we happen to specialize in) and we have never seen issues come up. With test after test being performed on them and the intakes passing every time, there is nothing to be concerned about in normal conditions. As mentioned though, it probably isn't the smartest idea to drive through an insane storm with these on, or any other open element filter intakes, for that matter.

    Shah @ SSR Performance
     
    • Like Like x 1
  7. Oryan

    Oryan United States Member

    35
    5
    8
    Multiple intakes on the 370/G37 use the same design concept this one uses. Rain isn't an issue with those and shouldn't be one here.
     
    • Like Like x 2
    • Agree Agree x 1
  8. Skraight

    Skraight United States Member

    26
    13
    3
    Maybe mentioned already and I missed it but, does it require any cutting or fully bolt-on?
     
  9. sym

    sym United States Member

    73
    29
    18
    These look amazing. Definitely a welcome departure from what everyone else is doing. I'm in.

    Did you remove the 'X' bracing from the factory intake shroud?

    I know this is a little nitpicky, but are you going to offer the pipes / filters in any other colors?
     
  10. Audible Silence

    Audible Silence United States Active Member

    108
    6
    18
    Wow, that is impressive. I was going to skip CAI, I thought the cost was too high, but these.... yeah.

    Just don't go racing in the rain, full throttle rims are where they will be sucking the most
     
  11. DaJackson

    DaJackson United States Stinger Enthusiast Staff Member Moderator

    903
    360
    68
    Location:
    Louisiana
    Oh damn that’s nice.

    If I hadn’t just ordered the snorkels I may have considered swapping the K&Ns for these.
     
  12. SSR Performance

    SSR Performance United States Member Authorized Vendor

    77
    122
    33
    Location:
    Orange , CA
    No cutting required! All fully bolt on :)

    We removed only the plastic shroud.

    We do offer the intake pipes in Impact black, Fashion grey, and Gloss red

    Shah @ SSR Performance
     
    • Like Like x 1
  13. SKStinger

    SKStinger Canada Active Member

    102
    39
    28
    Location:
    Saskatchewan, Canada
    Wow very nice! The only negative I see with this setup is that the bumper will need to be removed to clean the filters. Somewhat annoying but the design and performance numbers are impressive!
     
  14. SSR Performance

    SSR Performance United States Member Authorized Vendor

    77
    122
    33
    Location:
    Orange , CA
    Thank you for the kind words sir :) Really means a lot.

    Shah @ SSR Performance
     
  15. KLR STINGER

    KLR STINGER Canada Active Member

    258
    192
    43
    So only issue I see if for winter months up here in the North, the filters might freeze over.
     
    • Agree Agree x 2
    • Like Like x 1
  16. Angel

    Angel United States Active Member

    377
    96
    28
    Location:
    Rockford, Illinois
    I think the design is amazing i am just not convinced LOL....2 things heavy rains and winter in chicago are brutal.....i will probably to the JT route enclosed intakes.....love the design thou but for my area might not work as good
     
    • Agree Agree x 1
  17. junesrig

    junesrig United States Active Member Sustaining Member

    105
    37
    28
    Location:
    Northern California
    Looks very cool; just quick question, will there be an actual bracket that holds the filters up rather than the black zip ties? Just concerned the zip ties would brittle off and break.

    Just saw your notes in the picture and answered my own question.
     
    Last edited: Oct 6, 2018
  18. Nasty1

    Nasty1 United States Active Member

    114
    52
    28
    Location:
    Houston
    Alright. Thanks for the prompt response . Looks great.
     
  19. washguy

    washguy United States Active Member

    215
    64
    28
    Location:
    Big D Yall
    Taking off your bumper to clean the filters is no bueno for me.....sure the filters may not need to be cleaned often,but then again exposure to just a lil moisture, and a lil dust/crud equals a mud pie filter to me........Ive got a fliter like these in my turbo diesel 7.3 that's in an enclosed air box ,and you wouldn't believe at how dirty and fast it gets inside the box:( Wash
    Common sense wins on this design im thinkin
     
    Last edited: Oct 6, 2018
  20. Roarbomb

    Roarbomb United States Member

    34
    7
    8
    Location:
    Lubbock, TX
    I live in a VERY dusty party of Texas and not being able to clean these without removing the bumper is going to be a dealbreaker. Shame really, they are beautiful
     
Draft saved Draft deleted

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.