Offset Recommendation???

[white03]

Hey guys

So I've read pages and pages of discussions on wheels, sizes, offsets, tires, and related info. Looked at hundreds of your pictures of your, and others, combinations for our Stingers.

I'm about ready to order my own!! The only real concern I have is the offset to get in the wheels. Desire a flush fit without rubbing, or if anything a little inset would be better than poke.

I've decided on the Avant Garde M520-R wheel. 20x9 for the front and 20x10.5 on the back, with 245/30 tires front and 285/30 tires on the back

I've got the 2019 GT1 at stock height and no desire to lower

From what I've read, and discussed with a couple of you (THANK YOU!!), it seems like the front would use +30 to +35 offset and the back would use +45 to +50

Since the Avant Garde wheel can be ordered at "custom offsets", I am not stuck with "standard" offsets offered by the manufacturer.

Based on your experience with your 20" wheels, and knowledge you could get a +32 for instance instead of a +35, what would be your ideal recommendation for offsets???

Thank you

 

[Hawk853]

Hey guys

So I've read pages and pages of discussions on wheels, sizes, offsets, tires, and related info. Looked at hundreds of your pictures of your, and others, combinations for our Stingers.

I'm about ready to order my own!! The only real concern I have is the offset to get in the wheels. Desire a flush fit without rubbing, or if anything a little inset would be better than poke.

I've decided on the Avant Garde M520-R wheel. 20x9 for the front and 20x10.5 on the back, with 245/30 tires front and 285/30 tires on the back

I've got the 2019 GT1 at stock height and no desire to lower

From what I've read, and discussed with a couple of you (THANK YOU!!), it seems like the front would use +30 to +35 offset and the back would use +45 to +50

Since the Avant Garde wheel can be ordered at "custom offsets", I am not stuck with "standard" offsets offered by the manufacturer.

Based on your experience with your 20" wheels, and knowledge you could get a +32 for instance instead of a +35, what would be your ideal recommendation for offsets???

Thank you

This is a 20x9 with 32 offset. Between one wheel manufacturer and another, offsets and diameters being the same the back-spacing to the lip of the rim might be slightly different depending on how much meat they add to the lip.

I think I’ve seen some people running 37mm on a 9” and that would have been a huge fail with this wheel. In fact that’s what Get Your Wheels suggested when I discussed buying a set of Stance from them.