JB4 + E85/19 BEF, CPI, first logs on Map 5 & Map 7

[Striker's Stinger]

Just installed my CPI kit. First runs with CPI + BEF, ~E44 per sensor. Did these runs on Map 5 and Map 7, 3rd and 4th gear 30-80mph.

The car is a different beast. Best run so far 0-60 3.49 sec. i have a sub and a somewhat heavy sub box in the trunk so not looking for the fastest 0-60, but from 4.7 stock to this is pretty impressive.

How do they look?

Should I run Map 5 or 7 or maybe a custom Map 6? Never read logs but im learning.

Boost additive: 80
Scaling: 98
Min Flow: 5

 

[rbjohnson78]

From the looks of it, it looks good to what looks like around 90 mph, just need to see a longer run! Boost seems to be increasing the faster you are going, and 22.3 is the highest I saw, and may increase so you'll have to watch this. ECU is still learning and slight timing pull in cyl 5, so you'll have to see if that goes away after you do some more pulls. Timing is at 17.5 degrees so good there. Fuel pump looks good and trims look good.

I'm just unsure of the afr with the E you are running.

 

[AWDGT2]

Map7 target boost is just a hair more than 5 but not much. If you drop to additive to 75 they would probably be identical. Either is fine but like rbjohnson78 said keep an eye on overall boost, keep it under 23 and set boost safety at 25