Erik the Viking
New Member
- Joined
- Sep 3, 2018
- Messages
- 3
- Reaction score
- 0
- Points
- 1
Hi, my name is Hugh (AKA Erik the Viking) just bought a 3.3 Stinger as a toy (Still keeping the BMW 7 series for the time being). Must admit the car goes well and handles pretty good although not exceptional but then it is a budget vehicle with lots of tweaks!
Already removed the KIA badge on the rear and put the STINGER script on. BTW there is an easier way to measure where to put it that the video shows. The badge centres are 60mm apart but the left is slightly larger than the right one. Stick some masking tape across the tailgate about 1/4" down from the crease and measure from the edge of the left hole 27.5mm and that is the centre line of the rear panel. Add another 2mm and that is the stinger badge centre ( the new foam template has a centre hole in it so easy to align).
Already removed the KIA badge on the rear and put the STINGER script on. BTW there is an easier way to measure where to put it that the video shows. The badge centres are 60mm apart but the left is slightly larger than the right one. Stick some masking tape across the tailgate about 1/4" down from the crease and measure from the edge of the left hole 27.5mm and that is the centre line of the rear panel. Add another 2mm and that is the stinger badge centre ( the new foam template has a centre hole in it so easy to align).